Here's a quick update on how the Chevy 350 is coming, there's more detailed info on the "Engine" page on the top menu bar. After give the engine a good cleaning and taking a wire brush to all the remaining paint, I tapped up all the place's I didn't want paint to get along with putting the old valve covers on to protect the valves from overspray. Then, using Dupli-Color engine primer, I doused the engine with 3 coats of gray primer.
After letting the primer set up for around 15 minutes, I put on 3 coat's of Dupli-Color Chevy Orange engine enamel in 10 minute intervals. After the paint dries and is given time to properly cure (a couple days) it'll be time to start reassembling the engine and see how she runs.
No comments:
Post a Comment